Epoxy flake garage floors are one of the best upgrades you can make to a garage in West Michigan—clean, durable, and built to handle salt, hot tires, and daily wear. Our system starts with proper diamond grinding and prep, then we install an epoxy basecoat with a full flake broadcast and finish it with a tough polyaspartic topcoat for long-term protection. If you want a garage floor coating that looks sharp and is easy to maintain, we can help you pick the right flake blend and get you a fast, accurate quote.
Epoxy Flake Garage Floors Built for West Michigan
Our epoxy flake system is designed for real garage use—snow, salt, mud, hot tires, and constant foot traffic.
Our idustrial grade epoxy floors
Resists hot-tire pickup, road salt, oil, and common garage chemicals
Adds grip and hides imperfections better than paint or clear sealer
Easy to clean—sweep and mop,
no dusting like bare concrete
Looks finished and consistent with a full flake broadcast and high-wear topcoat
Epoxy Flake Garage Floor Cost in West Michigan
Most epoxy flake garage floors fall into a per-square-foot range, depending on the condition of the concrete and the system you choose. The biggest drivers of price are prep (how much grinding/repair is needed), moisture issues, and the size/layout of the garage.
What affects your price most
Concrete condition-spalling, soft top layer, old coatings, oil stains
Cracks/joints: how many repairs and how deep they are
Moisture: high moisture may require a moisture-mitigating primer
Garage size & layout: steps, stem walls, tight edges, or heavy grinding
How we quote it:We’ll confirm square footage, check the concrete, and recommend the right system for how you actually use the space—then give you a clear price with the full scope.
Epoxy & Polyaspartic Garage Floor Coating Process
1.Concrete Prep
We grind the concrete to a CSP-2 profile to remove the surface cap and open up the pores for proper adhesion. Cracks and surface damage are repaired to ensure a smooth foundation.
2.Moisture Barrier (If Needed)
If moisture levels are high, we apply a vapor barrier to protect the coating and prevent future issues.
3.Epoxy Basecoat
A 100% solids industrial-grade epoxy is applied to bond directly to the prepared surface, forming a durable base layer.
4.Flake Broadcast
Decorative vinyl flakes are fully broadcast into the wet basecoat. Choose from our Rock My Floor signature blends or customize your own flake colors.
5. Polyaspartic Topcoat
We finish with a UV-stable polyaspartic clear coat, adding a glossy, long-lasting finish that resists wear, chemicals, and UV damage.
Why Our Epoxy Flake System Lasts
A lot of peeling and “hot tire pickup” issues come from skipping prep or using a weak topcoat. Our system is built for real garage conditions in West Michigan—freeze/thaw, road salt, and daily use.
What we do differently:
-
Mechanical grinding (not acid etching): creates a real bond to the concrete
-
Full flake broadcast: adds thickness and helps hide imperfections
-
Polyaspartic topcoat: better wear and chemical resistance than basic sealers
-
Edge/detail work: clean cut lines and consistent coverage wall-to-wall
Recent Epoxy Flake Garage Floors in West Michigan
Here are a few recent garages we’ve coated around West Michigan, with different flake blends and finishes. Full flake floors photograph really well, but what matters most is how they perform—easy to clean, tough under hot tires, and resistant to salt and chemicals.
Popular looks:
Light gray blends for a clean, bright garage
Medium gray blends that hide dirt and tire marks best
Dark/black blends for a bold, high-contrast finish
Epoxy Flake Garage Floor FAQs
How long does installation take?
Most garages can be installed in about a day, depending on prep, repairs, and conditions.
How soon can I walk on it or park on it?
Light foot traffic is usually okay fairly soon, but we’ll give you exact timing based on temperature and the system used. Vehicle traffic typically needs longer.
Is an epoxy flake floor slippery?
Flake adds texture for grip. If you want more traction (especially in winter), we can adjust the finish for extra slip resistance.
Will it hide cracks and imperfections?
It hides a lot more than paint or clear sealer, but cracks can still move over time. We repair what we can and set expectations based on your slab.
Does it resist hot tire pickup?
Yes—when the slab is properly prepped and the topcoat is applied correctly. This is one of the most common failure points with cheap coatings and DIY kits.
How do I clean and maintain it?
Sweep/blow out grit regularly and mop as needed with a mild cleaner. Avoid harsh acids or heavy degreasers unless recommended.
What if my garage floor has moisture issues?
If moisture is high, we may recommend a moisture-mitigating primer. That’s the right way to prevent bubbling or peeling.
Do you offer different color flakes?
Yes—light, medium, and dark blends are most popular, and we can help you choose one that matches your house and hides dirt well.
Why Choose Rock My Floor Epoxy Garage Flooring Project
Choosing the right contractor can make all the difference in the quality and longevity of your concrete floor. At Rock My Floor, we combine expert workmanship with the best materials and equipment to deliver durable, beautiful surfaces that stand the test of time.
-
Locally owned & family operated — we care about every job
-
Owner is on-site for every project — no outsourcing or shortcuts
-
We use high-quality epoxy, polyaspartic, and concrete coating systems
-
Commercial-grade surface prep equipment ensures lasting adhesion
-
Full mechanical grinding and crack repair included — not skipped or rushed
-
We serve residential, commercial, and industrial clients
-
Based in West Michigan and proudly serving Hudsonville, Zeeland, Holland, Grand Rapids, and more
